How to change oven door seals

A Step-by-Step Guide to Changing Oven Seals

An oven seal, also known as a gasket, plays a crucial role in ensuring that your oven functions efficiently. Over time, these seals can wear out, leading to heat loss, uneven cooking, and increased energy consumption. Fortunately, replacing an oven seal is a relatively straightforward DIY task that can save you money on energy bills and improve your cooking results. In this article, we’ll provide you with a step-by-step guide on how to change your oven seal.

Before you begin, make sure you have the following tools and materials at hand:

1. New oven seal gasket

2. Screwdriver

3. Pliers

4. Mild detergent

5. Clean cloth or sponge

6. A small bowl of water

Step 1: Safety First

Ensure your oven is unplugged or completely disconnected from its power source to avoid any accidents. Safety should always be your top priority when working with appliances.

Step 2: Remove the Old Seal

1. Open the oven door and locate the existing seal gasket. It’s typically located around the perimeter of the oven door.

2. Use a screwdriver to gently pry the old seal away from the oven door. Be careful not to damage the oven door while doing this.

3. As you remove the old seal, take note of how it’s attached, as this will help you when installing the new one.

Step 3: Clean the Area

1. Once the old seal is removed, clean the area around the oven door where the seal was attached. Use a mild detergent mixed with water and a clean cloth or sponge to remove any residue or grease.

2. Make sure the surface is completely dry before proceeding.

Step 4: Install the New Seal

1. Start by aligning the new seal gasket with the oven door, following the same pattern as the old one.

2. Press the seal firmly into place, making sure it’s securely attached. You may need to use pliers to help with this process, especially if the seal has a metal clip or tension spring that needs to be secured.

3. Ensure that the entire seal is evenly installed around the door, with no gaps or wrinkles.

Step 5: Test the Seal

Before plugging the oven back in and using it, conduct a simple test to check the seal’s effectiveness:

1. Close the oven door and turn the oven on to a low temperature.

2. Place your hand near the edges of the door to feel for any escaping heat. If you detect heat escaping, the seal may not be properly installed, and you should recheck and adjust it.

Step 6: Final Checks

Double-check that the seal is securely in place and functioning correctly. Reconnect the oven to its power source and run a short cooking cycle to ensure that it operates as expected.

Conclusion –

Changing your oven seal is a manageable DIY task that can improve your lovely clean oven‘s efficiency and cooking results. By following this step-by-step guide, you can save money on energy bills and enjoy better-cooked meals. Remember to prioritise safety, and if you encounter any difficulties, consult your oven’s user manual or consider seeking professional assistance.

Scroll to Top